Icon Explanation

The icons displayed on each operating screen are explained in the following table.

You can also check these explanations from the [INDICATORS INFO] button on the footer. (Refer to Footer.)

Normal or Error of Air conditioning system

Icon	Name	Explanation
	Normal operation	Operates normally.
	Error	There is an error in the device.
	Life safety	There is a serious problem.
	No assignment	No device assigned.

Indoor status

Icon	Name	Explanation
	Occupancy sensing icon	Indicates the occupancy sensing status. The occupancy sensor detects people. (Only in VRF system)
	Occupancy sensing icon	Indicates the occupancy sensing status. The occupancy sensor detects no people. (Only in VRF system)
	IAQ icon	Indicates the current Indoor air quality. Green: Indoor air quality is normal. Purple: Refrigerant leakage occurs. Gray: VRF is not connected. (Scan is not performed yet.)
	IAC icon	Indicates the Devices status of indoor temperature. Icon color varies depending on the range of Zone Alert Thresholds. Green: Green range Yellow: Yellow range Red: Red range

Operation and setting status of Site, Zone, and Device

Icon	Name	Explanation
	[Start/Stop] icon	Indicates the power supply status for the Devices. Green: Running Gray: Standby
	Devices icon	Indicates the Device status. Green: Device operates normally. Red: An error occurs. Gray: No Device (Scan is not performed yet.)
	Schedule icon	Indicates whether there is a currently enabled Schedule or not. Green: Enabled Gray: Disabled
	Auto ON/OFF icon	When the occupancy sensor has been detecting no people for the set time, the device stops automatically. When the occupancy sensor detects people, the device starts the operation again. Green: This function is activated. Gray: This function is deactivated. *The icon differs by the display layout (card display or list display.) (Only in VRF system)
	Auto Economy icon	When the occupancy sensor has been detecting no people for the set time, the device switches to the capacity saving operation. When the occupancy sensor detects people, the device returns to the original operation. Green: This function is activated. Gray: This function is deactivated. *The icon differs by the display layout (card display or list display.) (Only in VRF system)
	Auto OFF icon	Indicates whether Auto Off is running or not. The operation of Devices can be stopped automatically by setting the time. Green: Enabled Gray: Disabled (Only in VRF system)
	Mode icon (COOLING)	Indicates the operating mode status of indoor unit. Indoor unit operates in Cool Mode.
	Mode icon (HEATING)	Indicates the operating mode status of indoor unit. Indoor unit operates in Heat Mode.
	Mode icon (FAN)	Indicates the operating mode status of indoor unit. Indoor unit operates in Fan Mode.
	Mode icon (DRY)	Indicates the operating mode status of indoor unit. Indoor unit operates in Dry Mode.
	Mode icon (AUTO)	Indicates the operating mode status of indoor unit. Indoor unit operates in Auto Mode.
	Mode icon (Not detected)	Indicates that operation status cannot be detected. The following situations may occur. ・Device is not registered to the Zone. ・Device is offline.
	Filter Sign icon	Indicates whether the filter cleaning time has come or not. Green: Filter cleaning is not required. Yellow: Filter cleaning is required. Gray: Indoor unit is offline.
	Remote controller group information	Indicates the status of this remote controller group. Black: This is the primary indoor unit in the remote controller group. Gray: This is the secondary indoor unit in the remote controller group.

Detailed operation status

Icon	Name	Explanation
	Defrost operation	The icon is displayed during the Defrost operation. This operation is performed to defrost the outdoor unit.
	Low noise mode operation	The icon is displayed during the Outdoor unit low noise mode.
	Capacity save operation	The icon is displayed during Capacity save operation.
	Freeze prevention operation	The icon is displayed during the Freeze preventive operation. This operation prevents from icing around the outdoor unit.
	Anti-freeze setting	The icon is displayed when Anti-freeze operation is set to "Enabled". This heating operation prevents the indoor temperature from dropping too much.
	Anti-freeze operation	The icon is displayed during Anti-freeze operation.
	Energy save operation/ Economy operation	The icon is displayed during the Energy saving mode operation or the Economy operation.
	Test mode	The icon is displayed when the Device is on a test operation.
	Maintenance mode	The icon is displayed during Maintenance mode.
	Oil recovery	The icon is displayed during Oil recovery operation.

Special status notice

Icon	Name	Explanation
	All operations invalid	Indoor unit operation is prohibited by administrator.
	All operations prohibited	All operations from the standard remote controller are prohibited.
	Temperature setting prohibited	Changing the temperature setting from the standard remote controller is prohibited.
	Timer setting prohibited	Changing the timer setting from the standard remote controller is prohibited.
	On/Off setting prohibited	Start/stop switching of air conditioner operation from the standard remote controller is prohibited.
	On setting prohibited	Starting the air conditioner operation from the standard remote controller is prohibited.
	Mode setting prohibited	Switching the operation mode of air conditioner from the standard remote controller is prohibited.
	Filter setting prohibited	Changing the Air filter setting from the standard remote controller is prohibited.
	Emergency stop	When an emergency stop occurs in the Site, the icon is displayed.
	Forced Thermostat Off	The icon is displayed during the thermostat stops the operation forcibly.
	Refrigerant leak detection	When a refrigerant leakage occurs in the Site, the icon is displayed. (Only in VRF system)
	Master indoor unit	The icon is displayed when the master indoor unit is designated in the refrigerant cycle.
	Operation mode controlled by external unit	This indoor unit operation is controlled by the external unit.
	Operation mode controlled by master indoor unit	This indoor unit operation is controlled by the master indoor unit setting.
	Mode mismatch	The icon is displayed when the operation mode setting of this indoor unit is different from that of the master indoor unit.

If this product detects unusual status, it shows alerts or notifications relating to the current screen.

Screen	Object	Content
Active alerts	All	All of the current alerts and notifications (Max. 50 items from the latest)
Active alerts	All	History of the alerts and notifications
Portfolio dashboard	Registered Sites	Offline
	Registered Devices	Hazardous condition
	Registered Devices	Refrigerant leakage
Site dashboard	The Site	Offline
	Zones in the Site	Refrigerant leakage
	Devices in the Site	Offline
		In Emergency stop
		Error
		Refrigerant leakage
Zone settings	The Zone	Refrigerant leakage
	Devices in the Zone	Offline
		In Emergency stop
		Error
		Refrigerant leakage
Outdoor unit settings	The Device	Offline
		In Emergency stop
		Error