Since using the nocria app allows operation from locations where the air conditioner cannot be viewed directly, the operation status might be different from that desired by the people in the room. Carefully check the conditions in the room before using the app.

• Regularly check to make sure the power plug is correctly plugged in, and that dust and other debris has not collected on the plug.
  In addition, check to make sure the wireless LAN adapter is correctly plugged in, and that dust and other debris has not been collected around the indoor unit connection port.
  Improper connection or insulation could cause the plug to overheat, catch fire, and start a fire.

• Make sure the air conditioner is normal and that there is no negative impact to the room even if the airflow direction is changed (there is nothing that can be blown around easily, the airflow will not directly strike people, animals, or plants, etc.).

  The airflow would knock objects down, cause a fire and injury, or stain household goods.

• When it is known there are people in the vicinity of the air conditioner, notify them in advance the air conditioner will be started and stopped from a separate location.
  If there are people on the table, etc., sudden starting and stopping could shock them, resulting in falling over or falling off the table. Sudden changes in outdoor temperature or room temperature could also cause people to not feel well.

  Do not use this if there are people in the room who cannot adjust the temperature themselves, such as children (infants), people with disabilities, and the elderly.

• Carefully check the setting conditions, such as timer settings, before operation.
  Unexpected starting and stopping could cause people to not feel well and negatively affect plants and animals.
• When using from a separate location, carefully check the settings and conditions in the room.
  Sudden changes in outdoor temperature or room temperature could also cause people to not feel well and negatively affect plants and animals.

When operating the air conditioner via the nocria app or a HEMS controller, the operating air conditioner will stop for safety’s sake under the following conditions.

• A condition in which communication between the wireless LAN adapter and the nocria App or the HEMS controller has been disconnected for 24 hours.

• A condition in which the HEMS controller has not been operated for 24 hours. (In types where communication is conducted at set time intervals, the air conditioner will not be stopped even if not operated for 24 hours or longer.)

1. When the last operation for an operating air conditioner was conducted using the air conditioner’s remote controller or the indoor unit button, the air conditioner is not stopped under any of the following conditions.

When operating the air conditioner via the nocria app, an audio notification is not issued from the air conditioner unit. (When operating the air conditioner via a HEMS controller, a reception sound and audio notification are not issued from the air conditioner unit. ) For details regarding the indoor unit indicator lamps, refer to the air conditioner operation manual.

When multiple devices are used to operate the air conditioner, operation may be limited to a fixed time to prevent simultaneous operation from multiple devices. For this reason, operation from another device cannot be conducted during or for 10 sec after remote controller operation.

There are functions in the air conditioner that regularly receive information, such as room temperature, from the remote controller, and if such functions are valid, operation from another device cannot be conducted during or for 10 sec after that communication. For details regarding air conditioner functions, refer to the air conditioner operation manual.

If the reception is poor between the wireless LAN adapter and the wireless LAN router, adjusting the orientation of the wireless LAN router body and antenna may improve the reception. Reception may also be improved by placing the wireless LAN router closer to the air conditioner or by using a wireless LAN relay.