FGLair™ app SET UP - STEP4: Pairing External type - Manual connection

1

Tap [+] to add a new air conditioner.

2

Select the adapter type of your air conditioner.

3

Read the note and tap [Next].

Page scroll

4

Select a [Manual connection].

5

Read the note and tap [Next].

iOS flow

Open [Setting] -> Wi-Fi by following the instructions on the mobile app.


Select the SSID of the air conditioner you are connecting to.


Enter the PIN code written on the WLAN adapter then press [Join].

Depending on the type of WLAN adapter, you may not need to enter a password.


"Open in FGLair?" pop-up will be displayed, tap [Open].

When pop-up is not displayed, return to app screen manually.


Tap [Continue].

Android flow

Select the SSID of the WLAN adapter you are connecting to.

For iOS, it is necessary to select the SSID of the adapter on the device's Wi-Fi setting screen.


Enter the PIN code written on the WLAN adapter then press [Connect].

Depending on the type of WLAN adapter, you may not need to enter a PIN code.

If the device connection screen is displayed, tap the SSID displayed.

6

Read the note and tap [Next].

Page scroll

7

Enter the WLAN Access Point password then press [Connect].

8

LED 1 and 2 will both flash 2 times.

 The setting is completed.

*
The time to complete the setting is different depending on the communication environment.
*
It takes max 15 minutes to complete the setting.


*
"FGLair" is a trademark of FUJITSU GENERAL LIMITED.
*
The company names and brand names referred to in this page are themselves the trademarks, registered trademarks, and products of the respective companies.
*
Screens, figures and movies are only for explanation.