Group list screen
Group list screen
Tap (a) to select the group.
"Others" contains the air conditioners that are not registered to a group.
| (a) | Group name | To check the air conditioner list in the group, tap here. Refer to "Air conditioner list screen" for details. |
| (b) | All on/off button | To start/stop the operation of all air conditioners, tap here. |
| (c) | Current status | It shows the current status of the group. To operate all air conditioners in the group, tap here. Refer to "Operation setting for group" for details. |
<Information on group>
| (a) | Error icon | It shows that an error occurs. |
| (b) | Timer icon | It shows that a timer is set. |
| (c) | Mode icon | It shows the current operation status. If all air conditioners in the group are stopped, "OFF" is shown. If some air conditioners in the group are operating at the same mode, the operation mode is shown. If some air conditioners in the group are operating at different modes from each other, [ |
| (d) | Room Temp. | It shows the representative indoor unit and the room temperature measured by the representative indoor unit. You can set the representative indoor unit from the Settings tab > "Group Setting" > "Room temperature display indoor unit selection". |
| (e) | Set Temp. | It shows the set temperature. If all air conditioners in the group are set to the same temperature, the set temperature is shown. If air conditioners in the group are set to the different temperature from each other, "--" is shown. *Even if some air conditioners are stopped or in the Fan mode, the set temperature is shown when all other indoor units are set to the same temperature. |
] is shown.All start/stop operation
- Tap (a).
The All Start/stop Operation window opens.
- To stop the operations of all air conditioners, tap (b).
To start the operations of all air conditioners, tap (c).
All air conditioners start/stop the operation, then the completion message appears.
- Tap (d) to close the window.
The operation setting is complete.