FGLair™ app SET UP - STEP4: Pairing USB: RC type 3 - Manual connection
1
Tap [+] to add a new air conditioner.
![Tap [+] to add a new air conditioner](/shared/img-fglair-pairing001-01.png)
2
Select the adapter type of your air conditioner.
![Select the adapter type of your air conditioner](/shared/img-fglair-pairing002-01.png)
3
Select a [Remote Controller Type 3].
Page scroll
![Select_a_[Remote_Controller_Type_3]](/shared/img-fglair-pairing-003-rc03-01.png)
4
Read the note and tap [Next].
![Read the note and tap [Next]](/shared/img-fglair-pairing004-01.png)
5
Select a [Manual connection].
![Select a [Manual connection]](/shared/img-fglair-pairing005-01.png)
6
Press [WLAN] 2 times on the remote controller.
![Press [WLAN]](/shared/img-fglair-pairing-rc03-001-01.png)
- *
- Make sure to set the remote controller to the OFF state before starting.
- *
- Remote controller shown is a representative model.
7
[L2] will be displayed on the remote controller display.
![[L2] will be displayed](/shared/img-fglair-pairing-rc03-002-01.png)
8
Select [01] using [TEMP ˄] or [TEMP ˅].
![Select [01]](/shared/img-fglair-pairing-rc03-003-manual-01.png)
9
Press ON/OFF button.
WLAN indicator lamp on the indoor unit will blink.
![Press ON/OFF button](/shared/img-fglair-pairing-rc03-004-manual-01.png)
10
WLAN indicator lamp on the indoor unit will blink.
![WLAN indicator lamp on the indoor unit will blink](/shared/img-usb-rc1-easy-connection-ss-12.png)
11
Select [Next] on the mobile app screen.
Page scroll
![Select [Next] on the mobile app screen](/shared/img-fglair-pairing012-manual-rc03-01.png)
Open [Setting] -> Wi-Fi by following the instructions on the mobile app.
![Open [Setting]](/shared/img-fglair-pairing-ios001-01.png)
Select the SSID of the air conditioner you are connecting to.
![Select the SSID](/shared/img-fglair-pairing-ios002-01.png)
Enter the PIN code written on the WLAN adapter then press [Join].
Depending on the type of WLAN adapter, you may not need to enter a password.
![Enter the PIN code](/shared/img-fglair-pairing-ios003-01.png)
"Open in FGLair?" pop-up will be displayed, tap [Open].
When pop-up is not displayed, return to app screen manually.
![Open in FGLair?](/shared/img-fglair-pairing-ios004-01.png)
Tap [Continue].
![Tap [Continue]](/shared/img-fglair-pairing-ios005-01.png)
Select the SSID of the WLAN adapter you are connecting to.
For Android, it is necessary to select the SSID of the adapter on the device's WLAN setting screen.
![Select the SSID](/shared/img-fglair-pairing-android001-01.png)
Enter the PIN code written on the WLAN adapter then press [Connect].
Depending on the type of WLAN adapter, you may not need to enter a PIN code.
If the device connection screen is displayed, tap the SSID displayed.
![Enter the PIN code](/shared/img-fglair-pairing-android002-01.png)
12
Select [Next] on the mobile app screen.
Page scroll
![Select [Next]](/shared/img-fglair-pairing013-manual-01.png)
13
Select the WLAN Access Point you are connecting to.
![Select the WLAN Access Point](/shared/img-fglair-pairing014-manual-01.png)
14
Enter the WLAN Access Point password then press [Connect].
![Enter the WLAN Access Point](/shared/img-fglair-pairing015-manual-01.png)
15
WLAN indicator lamp on the indoor unit will turn on.
The setting is completed.
![The setting is completed](/shared/img-fglair-pairing016-manual-01.png)
- *
- The time to complete the setting is different depending on the communication environment.
- *
- It takes max 15 minutes to complete the setting.
- *
- FGLair is a trademark of Fujitsu General Limited.
- *
- App Store and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries.
- *
- Android is registered trademarks of Google LLC.
- *
- The company names and brand names referred to in this page are themselves the trademarks, registered trademarks, and products of the respective companies.
- *
- Screens, figures and movies are only for explanation.