FAQ: AIRSTAGE Cloud
In the Ventilator's IAQ sensor threshold setting, I set all the sliders to the right end and can not change them.
-
The following causes may be considered:
-
・Delay in the MFA service
-
・Malfunctioning of the telecommunication carrier's system
-
・Settings of the device receiving the SMS message
-
Take the following steps:
-
1. Please retry the login process.
-
2. If you still do not receive the SMS message, please re-check whether your mobile connection is active as well as your device settings.
-
*
-
AIRSTAGE Cloud is a trademark of Fujitsu General Limited.
